The Progressive Dynamics Inteli-Power RV Converter and Battery Charger, # PD9160ALV is not a transfer switch, it converts AC shore power to DC power to run 12V loads and charge a battery bank. Connect this to your AC circuit to charge your battery bank from shore power when available, designed for Lithium Batteries. The converter uses a high voltage output to provide the proper charging profile for lithium batteries. If your RV already has a stock converter charger, it will need to be... view full answer...
The AC adapter that comes with LED Light Strip Kit # DG52688 does indeed plug into a standard grounded outlet (up to 240 volts). The output of it would be 12 volts which I think is where the confusion is. view full answer...
It's unfortunate your awning lost that battle to the tree, but hopefully you can take at least a bit of solace in knowing that you certainly aren't the first one (and won't be the last) this has happened to, and trees are, to the best of our knowledge, undefeated in their battles with awnings.
But to answer your question, yes, the hardware is indeed included with the Solera 12V XL Power RV Awning to mount it. And it will indeed be the same (just a bit longer), assuming your previous Solera... view full answer...
The Dutton-Lainson StrongArm 12-Volt DC Electric Winch with Remote # DL25220 is only compatible with a strap but we do have 12V winches with a remote that are compatible with a cable. For example, we have the Bulldog Winch # BDW15017 which has an exposed spool or the ComeUp DV-4500i # CU644512 which has an enclosed spool. Both of these are around the same price-point, are powered via 12V power, and come with remote controls.
Attached are review videos for both winches as well as a link... view full answer...
We do not offer a mounting bracket for the Roadmaster 12 Volt Outlet Kit # RM-9332 and none is included but we do have a similar hardwired 12V outlet product that does allow for surface mounting in the location of your choosing, part # HM55115. Please refer to the linked video for more on this item. view full answer...
Yes. The Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 45 Amp # PD4045KA is designed to be all-inclusive as far as RV power systems go and does come with a 12v converter and charger built in. view full answer...
The MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat - Manual Lift - 10 Speed - White # MA00-05100K does not come with a wall switch, but the Replacement Handheld Remote for Maxxair Roof Vent Intake/Exhaust Fans - Qty 1 # MA00A01150K will work with it. Keep in mind this does not have the power lift.
If you want the power lift, Then the MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - White # MA00-07000K is what you want which comes with the remote... view full answer...
The Jensen LED Television # JTV32DC does not come with a cigarette style plug included, but we have just what you need.
You can hardwire # RVS-505 to the power cord for the TV and plug right into a cigarette lighter. view full answer...
The Tekonsha BRAKE-EVN Trailer Brake Controller # TK63VR includes a hardwired connector that is intended to connect to a vehicle-specific harness on vehicles that have a direct connection port or to a pigtail # 7894 to allow a hardwired installation in a vehicle that does not have such a connection point under the dash. This pigtail harness is 34-inches long, long enough for most installations.
The black and blue wires on this part are 10-gauge and the others are 12-gauge; butt connectors... view full answer...
Aside from any additional wiring you may need to reach your power source (if there isn't one already near where the arms install), the Solera Smart Arm 12V Power RV Awning Conversion Kit # LC759404 comes with everything you need to convert your A&E/Dometic manual awning to a power awning. view full answer...
White fade means that the awning fabric of the Solera Smart Arm 12V Power RV Awning # LC405523 is white closest to the RV wall and then fades to black as it gets further away from it. view full answer...
The RM-9332 does come with installation instructions. It is a very simple install and will provide a power source, even with the car off, for your Even Brake System. view full answer...
Camco part # CAM40148 is a smoke-color replacement vent LID ONLY that fits specific production years of Ventline and Elixir vents models. It fits Ventline vents with a continuous metal hinge that were produced before 2008 and similar Elixir brand vents produced after 1994. This hinge type is shown in the linked photo.
We do also offer complete vent units that include the lid. These 14 x 14-inch complete vents are shown on the linked page. We have models without fans like # V2092SP-29 or... view full answer...
The Progressive Dynamics Inteli-Power RV Converter and Battery Charger - 12V - 80 Amps Item # PD9180A does come with three 30 amp fuses and if you want to have some extra fuses on hand we carry a Standard Fuse Kit with LED Indicator - 5 Amps to 30 Amps - 30 Pieces Item # PT72FR that you can keep in your RV in case of emergency. view full answer...
The ball on top of the suction mount of the # FOS05TASF is .85" in diameter.
As far as the cables, 1 cable is used to install the monitor. The 12v plug on the monitor end installs into a cigarette lighter port on your vehicle. I went ahead and attached a diagram that shows this adapter.
For the other cables, 1 cable is used for wiring the camera, and 1 wire is mounted from the housing into the power supply of the camera. The plug on the end of the cable for the camera connects the camera... view full answer...
We do have wiring that you can install on your trailer, but there aren't any specific wiring kits that are meant to come with the Adjustable Width Trailer Hitch Receiver # 13703.
For wiring you can use the Wiring Kit # C59496 which splices into your factory wiring and then draws power directly from your 12V power source which means your trailer lighting circuits won't get overloaded. view full answer...
The Slime Rechargeable All-Purpose Inflator # SLM40028 referenced in your question does include a built-in rechargeable lead acid battery. You will not need to use your own battery to power the inflator.
The inflator has a built-in gauge with Inflate Right Technology that allows you to set the desired pressure level so that the unit shuts off as soon as the desired level is reached. If you ever forget to charge the battery, the inflator can also be plugged into a 12V DC power outlet for... view full answer...
As long as you have a Jayco trailer, the Adapter 4 Way Flat to 6 Way Square for Jayco, item # 30104, is the only part that you will need to power the brake lights, turn signals and running lights on your trailer. You will not have trailer brake or 12 volt accessory power with this adapter. view full answer...
The box without the solar panel you are looking for is the TorkLift PowerArmor Locking Battery Box - 6V and 12V Batteries # TLA7708R; this is exactly the same as the TorkLift PowerArmor Solar Locking Battery Box # TLA7708RS with the only difference being it does not have the solar panel.
In regards to a gap, I cut out a part of the linked video review which shows there is a small gap on the top of the box (on the left), though you may be able to use the hole in the back, depending on how... view full answer...
The Go Power Portable Solar Panel with Digital Solar Controller # 34282610 is going to contain the solar panel with built-in solar controller, solar cable, battery clamps, ring terminals, quick-connect cables, SAE solar plug, XLR-style solar plug, and carrying case.
This is a 200 watt system that will work 12V battery systems, and measures 39" long, 52-13/16" wide x 2-13/16" deep opened, & 39" long, 26-3/8" wide x 2-5/8" deep closed. view full answer...
Go To Results